Then change the drone over to the left side and wait until the IMU is calibrated in that position.Next, move the aircraft onto its right side and wait until the IMU is calibrated in that position.Start with the drone on its belly and wait until the IMU is calibrated in that pose.

You need to place the drone in different poses to calibrate IMU. Once the above steps are done, the IMU calibration process would start.Then click on the drone icon go to Main Controller Settings > Advanced Settings > Sensors > IMU and hit the “Calibrate IMU” button.) (In DJI GO 4 app, click on the three dots at the top right corner. Enter the IMU calibration panel and start the calibration.

If the drone is foldable, power on the aircraft while its arms are closed in.

It’s also good to remove the propellers from the drone but it’s not necessary.

First, remove the gimbal cover from the drone because when the drone restarts during the calibration process the camera would be damaged.

If you’re done with the above steps, let’s start the process. If you have an iPhone, open your measure app or if you have an android download the bubble level app and make sure you place your drone on a level surface.

Put the drone on a flat surface and keep metal, magnetic stuff, and electronics away from the drone.

If you just flew the drone, give it a few minutes to cool before calibrating.

Let’s look at how to calibrate DJI drones cause other drones will have a similar process, too Before calibrating the DJI drone It’s fine if you don’t know how to calibrate the drone. Cause some people also faced the issue because of improper calibration. Fix the Drone Won’t Calibrate Issue Solution 1: Check whether you are calibrating the drone properly.įirst and foremost, this is essential to check whether you are calibrating the drone properly. Most drone storing bags have a lot of friction so when you carry the drone it’s rubbing against the drone and its surface gets charged. But what if the drone’s surface got magnetized? I have heard some stories like that. When you are calibrating the drone you definitely have to keep metals and magnetic stuff away from the drone. For DJI drones, most of the time faulty IMU (Inertial Measurement Unit) causes the issue. If you are having this issue in a new drone or after crashing the drone and also you are experiencing unstable flight there is a chance that it may cause damaged components. Such as an accelerometer, barometer, gyroscope, and thermometer. There are more components that are essential for calibrating the drone. So make sure to charge the battery fully before calibrating the drone.

If you are trying to calibrate a drone with low battery power its system might reject the calibration process because of its built-in safety features keeping the drone from improper calibration. Reason 3: Low batteryĭrones like DJI have more safety features to keep the drone safe and avoid risky actions. I was also used to being lazy to update my drone’s firmware back in the day and I started to notice some issues with the drone. Man, outdated firmware or inconsistent firmware will lead the drone to more and more issues. If you are attempting to calibrate the drone on an uneven surface it will lead to calibration failure or faulty calibration results. When you are calibrating the drone you definitely have to use an entirely flat surface. Besides that, charged drone surface and calibration surface also could affect the calibration. Most times the drone won’t calibrate because of the low battery power, faulty components (faulty IMU/ Compass), electromagnetic interference to the calibration components, and firmware issues. I went through more articles and forums and talked with some drone owners and decided to write this article on thedronestop. So I was curious and decided to find out more about the issue. Maybe there are more DJI drones, whatever. When I was researching drone problems I found that most drone owners face drone won’t calibrate issues, most of the time DJI drones.

Phoenix mini drone wont turn on